1. Home
  2. C. Communications and Settings
  3. C1. Assembly & wiring introduction

C1. Assembly & wiring introduction

Reading Time: < 1 minute - Video Time:

1. Introduction

For each of the programming ways, you will learn in the upcoming chapters how to Assemble and Wire your VPFlowScopes. Including the Location of different programming ways. Remember that NOT every VPFlowScope can be programed in every way.

C1.1.Overview of the different VPFlowScopes with their corresponding assemblies
C1.2.Programming of your VPFlowScope via VPStudio 2 software

Modbus is not treated in the following sub-chapters. For a full explanation on the Modbus communication see chapter G9.

Updated on January 25, 2021

Was this article helpful?